Thread: Serpent 720
View Single Post
Old 05-14-2007, 10:02 PM
  #2400  
Ffejdat
Tech Fanatic
iTrader: (5)
 
Ffejdat's Avatar
 
Join Date: Apr 2005
Posts: 904
Trader Rating: 5 (100%+)
Default

John- the difference in the left and right eccentric is the how high they mount the diff, if you have them in wrong, your diff will sit too low, or too high in the car, not sure which.... According to the directions, the front eccenter has the hole on the left one, the rear eccenter also has the hole on the left, but the rear eccenter has the "flats" on the top and bottom of the shoulder, see pg 14, step 3.4 of instructions for more clarification... The funny thing is, I was at a race last weekend with "Ammdrew" from these forums, he had some eccentrics with NO dot or hole in them, no discernable "up" or "down" to them either, I don't know if these were early kit ones, or 710 ones, as I have never had a 710... Hope this helps!
Ffejdat is offline  
Reply With Quote