Hey Dido

Youre gonna love this motor !

First thing is add shims, it prolly has .3 in it add .2 off the bat

Get you box charged ( youll need it )
1 Quart of fuel
Charged ignitor
Blow torch or heat gun

Chech carb idle gap is around 1 mm
Prime and ready your engine
Pre heat to about 150 F ( side of block under head )
Give it a good kick in the guts, should start first go provided its primed correcly
Bring revs up to 1/2 throttle
Tune HSN to clean 2 stroke ensure engine heats up to at least 180 to 220 F
Run 1 tank at 1/2 throttle
While still running fill tank and run the rest of the quart out on the road .

If its cold wrap alfoil round the head to keep heat in

it will take around 1 to 2 gallons for it to be fully run in but you can race it after 1 quart

If you want to run HB 444 ( thats our off road blend ) contact Brian Cooper on [email protected] they are our US manufacturer in NY

Fuel Type run in All castor 12% 20 % nitro
After that run it on HB 444 25% nitro if you wanna go higher add another .2 shim and run it on HB 444 30%

Cheers MM