Originally posted by SpeedTech
Hi Guys,
Our CNC Machined aluminum parts for the Losi XXX-S are now available. The first batch of parts are the following:
ST1230-2R Front Main Pivot Block (2R)
ST1230-4R Front Main Pivot Block (4R)
ST1230C Front Main Pivot Block combo
ST2230-2R Rear Main Pivot Block (2R)
ST2230-4R Rear Main Pivot Block (4R)
ST2230C Rear Main Pivot Block combo
STXXXSF 3.0mm Graphite Shock Tower (front)
STXXXSR 3.0mm Graphite Shock Tower (rear)
Also pictures of our project car is available on the website as well The following parts are coming end of the month:
ST2230-91 rear inner mounts (with low roll center adjustments)
ST1230-59 front inner pivot mount (with low roll center adjustment)
ST1540 precision machined aluminum steering bellcrank
Visit our website or click on the following link to go directly to the Losi page:
http://www.sslorder.com/speedtechrc/124.html
Thanks guys!
Steve Wang
Speed Tech R/C
www.speedtechrc.com
Steve here's a suggestion. You should drill and tap a hole in each of the aluminum hingepin mounts so a setscrew can be used to lock the pin in place. This prevents the hingepin from rotating in the the aluminum pieces and enlarging the holes. The nylon arms should be the only thing rotating/rubbing on the pins.