Originally Posted by Three
I have a Futaba 9650 servo mounted in my mini, but have encountered the following problem: The servo mounts keep moving. Have tried just about everything except glueing them but to no avail. New screws, lockwashers, nothing seeems to work. Have verified that there is no contact between the servo saver (Kimbrough mid-size #201) and chassis. Also the end points are such that no contact is made between chassis and front uprights (Tamiya aluminum #53523).
Must be TCS legal.
FYI - What I did to help with servo movement was to take my transponder and servo tape it to the top of the servo, pinching the transponder between the support posts. Seems to do a great job so far.