R/C Tech Forums - View Single Post - Serpent 720
Thread: Serpent 720
View Single Post
Old 04-17-2007, 10:25 AM
  #2301  
rcpanama
Tech Adept
 
rcpanama's Avatar
 
Join Date: Mar 2004
Location: Panama
Posts: 181
Default

Originally Posted by Winner's Circle
If you are loose coming off of a turn under throttle then you are probably overdriving the rear too much. A larger front tire or smaller rear or both will stop the car from being loose off of a turn. But like everything in racing the more overdrive to the front the less high speed on-throttle steering you will have.
Ok thanks for your answer, let see if I understood:

If I need to correct an Over Steer condition, can I solve it by installing the 18T front Pulley and the two side pulleys to be 22T with a 1.5mm difference between the front and rear tire will give me a 1.61% more rear drive if I go to 3mm tire difference this will give me a 3.93% more rear drive.

Will the use of the 18T pulley correct the Over drive condition by increasing the rear drive ?

RCPNAMA
rcpanama is offline