Originally Posted by POOKYT
Duckman--Thanks for the pic! Looks good the way you have it laid out.
BTW---did you seperate the red/blk/white speedo wires and then run them in the fins on the GTZ heat sink? From the pics that is what it looks like. If so then that is awesome!!!!
Brant
Yeah - I did run the wires through the heatsink... I actually used a new lead from the receiver, routed it around the servo and then soldered it onto to GTX prongs. I was tired of worrying if the plug would come undone in a race. I also wired a new switch and soldered those leads on as well... It makes for a really clean finish on the wiring and eliminates the worry that the plug will come undone from the speedo (since its mounted sideways, that increases the chances).