Originally Posted by afm
You may want to adjust the shims of the combustion chamber depending on nitro-content (see table)
Nitro content: 16% 20% 25% 30%
Head shims: 0.40mm / 0.40mm / 0.50mm / 0.60mm
Large tracks may require an extra 0.10mm shim to reach higher top speed and improved fuel consumption, but this will decrease acceleration slightly.
TURBO COLD GLOW-PLUGS to use when humidity is below 70%
•P5TC hot filament
•P6TC medium filament
•P7TC cold filament
TURBO HOT GLOW-PLUGS to use when humidity is above 70%
•P5TH hot filament
•P6TH medium filament
•P7TH cold filament
The filament number will depend on the ambient temperature. Colder use hoter filament. Hotter use colder filament.
AFM
Much needed info. Thanks AFM.