Originally Posted by revo523
Anybody had problems with this popping out to much causing the clutch to stay engage because this is the problem i have with mines any help will be appreciated.
The old version of the clutch does has the tendancy to pop out if you don't have the clutch set correctly. Tighten the clutch nut a bit more and decrease the clutch gap and end play. There is an updated version of the silver ring that pushes on the clutch shoes. The updated version is suppose to be a little wider, which prevents the clutch shoes from "sticking" between the flywheel.
You cannot interchange the UFO clutch parts. The UFO clutch bell has more surface area than the old clutch.