Jetbill007,
Have you tried these settings?
Clutch:
Kyosho White Clutch Weight - Drilled to 3.5mm
Kyosho 1.9mm Hard Spring at 1.40 setting
Gap = .50
Kyosho Grey Clutch Shoe
Gearing:
16 / 22 Pinion
56 / 59 Spur
This should work ok, if you are using stock kit parts your clutch might be a little to weak for this motor. Therefore it goes into crisis when the engine is making it's peak power and/or is engaging too early. If the clutch and carb are setup right, when the 2nd gear engages, the engine will pull really hard, there should be no hesitations.
As far as I know the Kyosho red shoe does not work very good with this motor, you want to use the grey one.
If you have any problems contacting Team Orion USA, try calling or emailing Traci, 714 694-2812 or
[email protected]
Nano