Originally Posted by gonzo416
teamgp thanks. now should i use the 6d caster and 2d camber because as you have said previously that when the front wheels are turned the camber increases.
The amount of camber needed really depends on the surface grip and layout. Use the 6d caster c-hubs and then start with 2d camber. Check the tires after at least a 5 min run. If the inside diameter of the front tires is more than .1mm smaller than the outside diameter, then try 1.5d or even 1.0d. Pay attention to the handling (and lap times if you can) as well. Flat wearing tires are good, but faster lap times are better.