Originally Posted by MRX4-R03
I was wondering if anybody here has had there header springs break when using the orion wasp engine.
I just installed a orion wasp .12 engine and have gone threw 4 springs this weekend also another guy said he has had the same problem, just wanted to know what is causing this problem, header and pipe seem ok no sign of impact,s or hits it just seems odd..
I have a lot of problems with all header springs , there all weak and brake easily. I found that STS seems to have the strongest springs ive come across. For both the pipe and the header to pipe small springs. They seem to carry more tension are thicker and can resist snapping. Another thing is I just dealt with some issues on my TZ. What you want to do is make sure your not trying to get all the slack on one side , make sure to pull equally on both sides to get yourself the correct amount of room. Takes a little more time but this seems to give it the room needed to not snap.