Fellow Cycloners: I have been experimenting with the rear CF brace of the Cyclone, the one that goes over the middle shaft where the Spur gear goes on...well, since the bulk heads are split on the CYclone, and what binds them together is that brace, maybe by just using just 2 screws instead of the 4 or 6, it might allow a bit more flex/traction at the rear, like the Xray MTF deal...I have tried it now, and with only 2 screws, I get a bit of understeer at front. I then use all 6, and the understeer goes away...hmmmm...it seems that with only 2 screws you get more flex/rear grip, thus a bit of push up front- with the full 6, then ints back to the original setting and reaction...has anyone given this a try?