Originally Posted by Burlap
Running 46mm, and what I have seen, no one has mentioned that fact. The car seems fine with the C-A front toe blocks setup. Considering the angle of the hinge pins on the front in the kit are 2 deg toe out, and with C-A it runs 1 deg, interesting to see what happens.
same here with the 46mm dogbones and B/A the driveshafts pins used to be right at the end of the one way outdrive and bind, especially when the suspension is compressed. This doesn't happen with the new MRE one way I may add. Switching to the 42mm outdrives is ok but would be better using the original 415 one way outdrives which are a bit offset.