Originally Posted by benoitrdv
Supplied Manual first Even with 5 cells? Please just give us the ratio used by R. Volker at DHI. + any starting point for TITC outside.
Upps... sorry! Must have missed the 5 cell option...
We ran 4.5t with a gearing of around 9.5:1 with sintered magnet, but remember the DHI-Cup was a technical indoor track!
TITC is 6-cells again and a much bigger track (even tough, still technical for outdoors in "european standards"...), so this is no real comparison! But if it's of use for you, I do think we'll start around 8.0:1 in Thailand with 4.5t sintered.
Originally Posted by corallyman
My question is there a difference in price between the two speed controls? Also would the TC version also be able to handle 4 cell 1/12th scale or should a 2007 spec handle those chores. I perfer not to run a receiver pack in 1/12th unless I have too.
The TC-Spec is a bit more expensive, but I'm unfamiliar with the exact pricing (sorry!) and it obviously also variies within the different countries.
Problem with TC-Spec in 1/12 car is that it will not fit under the body... because the heatsink/fan are pre-installed and there's pretty much no way to get it off! But all our team runs "2007 Edition" in 1/12 anyway and it works great.