R/C Tech Forums - View Single Post - Hobao GPX4 Pro
Thread: Hobao GPX4 Pro
View Single Post
Old 02-14-2007, 09:13 AM
  #458  
JOHN TAN
Tech Addict
 
JOHN TAN's Avatar
 
Join Date: Jan 2007
Location: Singapore
Posts: 561
Default

Originally Posted by Delta9
Replace the o-rings and seal up the engine, First dissasemble and see if you did do any damage when you ran it lean, but if was for such a short time as you say there should be no harm done, tear it down and inspect the piston and sleeve. You got nothing to lose. If you need any help just ask. good luck
actually disassemble the machine is the most difficult part for me... I will try to sealup and replace o-ring 1st...Thanks a lot...
JOHN TAN is offline