R/C Tech Forums - View Single Post - alignment on the hpi nitro rs4 3 type ss
Thread: alignment on the hpi nitro rs4 3 type ss
View Single Post
Old 03-10-2003, 05:03 PM
  #3  
popsracer
Tech Elite
 
popsracer's Avatar
 
Join Date: Oct 2002
Location: "Hot, Sunny Southern California"
Posts: 3,120
Default alignment on the hpi nitro rs4 3 type ss
nitroblade;

MY recommendation is ZERO Toe in the Front to start. Nice and neutral steering feel for starters. Adjust to Toe-out for more turn-in and Toe-in to tame the steering down.

MAXIMUM Rear Toe-in on ALL of the current HPI 1/10th Nitro cars is 2 Degrees.

Use the 10 degree Caster blocks to start, nice and neutral steering.

Start with -1 degree Camber on rubber tires and adjust based on tire wear and handling. With foams up to -2 degrees Camber is exceptable.
popsracer is offline  
Reply