Originally posted by VenomWorldOrder
usually servos conk it (generally the throttle servo ) due to the user setting it up incorrectly.
any servo will eventually bust if loaded up enough. i can vouch for it, unfortunatly i've ruined a very good ko propo metal gear servo by setting it up incorectly on the throttle. luckily i bought it second hand and i didn't cost me a arm and a leg.
the 3003 futubas work well for a throttle servo.
that is so true... make sure you limit the throttle travel to around 60 or 70... if you set it to 100 but your carburator is fully opened at 70, then the difference of 30 is what your servos are coping and enduring everytime you go full throttle... this goes the same for brakes...