Originally Posted by asw7576
Let me help you :
1. Replace all 3x8mm screws ( rear bulkhead + engine mounting ) with 3x10mm screws. Some parts can accept 3x12mm, its better but not necessary.
2. Dremel the chassis where the clutchbell meet the chassis.
3. Dremel the engine brace ( the plastic that connects rear bulkhead to upper deck ) because the engine brace is touching 2nd speed housing adapter.
4. Increase the height of rear stabiliser because the stabiliser touch the 2nd speed housing.
5. Increase pinion size by 1 tooth.
6. Always clean and re-oil the three bearings inside clutch bell before playing / racing.
Thanks for the reply asw,,
Sorry If my technical knowledge is not as vast as many members here. But what exactly do you mean by dremel?? I assume it's a machine involved term,, right??
If so,, can you kindly provide a pic of such a machine or process??
I hope i'm not asking for too much here, but I really appreciatte the help so far..
