Originally Posted by fullsyzz
Ok, so if I was running 22/84, and you say gear more conservatively, does that mean running smaller than a 22t pinion or bigger than 22t? From what it sounds, I'm right in the middle of where I should be. Some seem to think a 19/84 is a good starting point, others are saying 29/84.
Also, you guys that are running 36/104, or close to it, what brand of gears are you running like that, that will fit the T2? Does that mean I gotta go to 64 pitch?
About the only gears that work are the
www.precisionracingsystems.com Pro-Lite Touring gears. Have you calculated your gearing at
www.gearchart.com yet? If you're running 22/84 with 58mm tires that's a 28mm roll out and way low for this motor. You can try going more conservative but in my opinion that's the opposite direction you should go. At least borrow a pinion around 28-30 teeth and see how it feels. That will put you closer to a 36-38mm roll out. Good luck.