Looks Great John!!
Well I am making the same front suspension as John.
I will use the stock pan car arm for the upper and a Hpi rs4 upper arm for the lower arm it is a little thicker and the same size as the pancar arm.
My Aluminum mount will almost be the same but the arms will be set in equal length and the pins for the arm mounting will also be held in by a set screw on top of the pin.
The Shock will mount to the front upper part of the arm mount much in the same place as Johns I will post pics when I am done. and I will also be sending John it along with some other stuff.
Last edited by Marty Peterson; 08-03-2008 at 12:39 PM.