Hey guys. Just a quick question in regards to the shock pistons. Is there any recomendations on what size I should drill the holes in the rear pistons. I'm sure I read it once, but can't find it. I would figure it out on my own, however I can't run my car for a few months due to winter weather. I'm just looking for a starting point for the shock piston/oil/spring combo.
I have the TM, Serpent and Mugen springs. I also have the Xray for the elctric car which seem very high quality and plenty stiff enough for nitro, but need to find the conversion chart or specs for the Xray springs. Anyway, any help for a "starting" point would be very appreciated. Thanks in advanse my fellow racers!!!!