XXX-S Issue
Hey everyone, I'm obviously new here. I used the search button some for my problem but I didn't get anything useful.....
I got my first car for Christmas, a Team Losi XXX-S RTR. I know a good amount about how suspensions work, and I set up the front wheels to toe out about 2 degrees for good initial turn-in. However I just ran it to make sure nothing would fall apart with the wheels off the ground, and when I use the accelerator and turn the steering to lock on either side, I hear a fairly loud grinding sound from the wheel that would be inside the turn and the suspension vibrates. The CVD is at a pretty sharp angle at the spindle and carrier, but it's no more than 45 degrees. I'd like to keep the car set up with toe-out, but how do I get it to work without the grinding sound? I'm also running -1 degree of camber on the front.
Thanks for any help