pistons
Smallest hole is higher number!! Do this-when you build your shocks, take a sharpie and darken the number molded into the piston. Now buid the shocks so the number faces up towards the cap-That way when you go to change shock oil 5- 6-months after say gas racing season-you'll know whats in there without totally tearing down the shocks!!!
JDM-thanks!!!
Spaz-Yup-Dumas ran my milled chassis at the Birds he said!!! Cool!!! On his I hand filed and sanded smooth the edges on the bottom. Partially for less weight and more clearance when running less than 4mm ride height , but mostly because it looks cool and feels so smoooothhh!!! Production chassis dont get that treatment-takes many nights to do it right!!!