R/C Tech Forums - View Single Post - MBX5
Thread: MBX5
View Single Post
Old 12-20-2006, 04:43 AM
  #671  
RYAN BARNES
Tech Regular
 
RYAN BARNES's Avatar
 
Join Date: Mar 2006
Location: Bardstown,KY
Posts: 365
Default

Merf- you need to go back and read the previous page of this thread, we covered the starter box issue last week Here's a link to your answer! Good luck-Ryan http://carolinasrc.com/Webstore/Scri...?idproduct=475

Scott- Yes, as I was talking about earlier the new R has ALOT of down travel, so it transfers weight really well thru corners. I don't like the droop screws because they dig into your chassis and get out of adjustment, so I limit my shocks internally using a stiff black o-ring that I place on the shock shaft before I push it thru the shock body. I worked with diffrent caster settings and shock positions to get my corner entry really good on the R. I think you'll see what myself and Chad were talking about if you get the R kit and build it, the fit and finish on this buggy is amazing, second to none!! Post up if you have any other concerns. -Ryan
RYAN BARNES is offline