non-ps fly wheel with a non-ps engine
For the HPI Nitro Cars;
1) You MUST use P/S motor mounts and Flywheel with an engine that is EQUIPPED with a Pull Starter. Some type of Header is needed also that will clear the Pull Start housing.
2) A NON-P/S engine may be mounted either way. With the P/S Flywheel and Mounts OR purchase NON-P/S Flywheel and Mounts which lowers the engine in the chassis.
The Motor Mounts and Flywheel MUST match each other. You CANNOT mix and match P/S with NON-P/S.
The Starter box doesn't care what it is starting as long as the starter wheel contacts the Flywheel.
I hope this clears up any confusion (unless I'm the one confused) NOT!