Originally Posted by DirtyDog3375
As a guide, use the ambient temp of the room as a guide if the ambient temp is low (under 25'C - ie. night time racing or a cool day) then use a higher value like 05, 06 if it is above 25'C use 03 and 04. Make sure the thermal sensor is used and the temp cutoff is set to 47-48'C.
so setting the temp probe to 48 degrees, what happens on a 40 + deg day
when the battery will get to round 60 deg u end up with an undercharged pack. just stick to 3mv setting and set temp to 60 deg havn't had a problem with mine using this method