Even more Confused
Quote from site

"Setting Delta Peak on the Cell Master:"

Now that you've read the technical information concerning why the Cell Master utilizes lower delta peak settings, perhaps you would like to know how to actually input the value.

In the setup menus for each charging profile, there are two digits for setting your delta peak value. This setting is in terms of millivolts (mV) for the entire pack. You can think of your setting here as 0.0##V.


So, a value of 06 (as in the above pictures) is equal to 6mV or 0.006V (for the entire pack).

***There is no setting on the Cell Master for mV per cell. A 06 setting (0.006V or 6mV) for a 6 cell pack is equal to 1mV or 0.001V per cell (calculation: 0.006/6=0.001).