Originally posted by Boomer
It is "good enough" to start with, especially with the new tank (if you've got the pressure nipple in the lid, it's new)
However, go back through and look for some of the mods that we've done, specifically:
- replace the servo-saver spring with the slipper spring from the RC10GT
- Reinforce the shock towers (brass tubing and longer screws or fancy premade things)
- replace all tie rods with Lunsford Titanium
I think those are the "essential" mods. I also highly recommend installing the blade-type sway bar at the front, and I'm going to try NTC3Nut's rear mod.
Thanks mate! Thats what I was after!
You will have to excuse me if I don't want to go through 2500 posts looking for information