Originally Posted by Z.Hallett
i use a 100 tooth spur on mine. i only have an issue running 31+ pinions b/c the motor gets caught on the t-bar. i have to grind the t-bar to allow the motor to move far away enough from the spur. i am going to switch to maybe a 92 tooth spur.
hope that helps.
-Zac
try to stay away from grinding the T plate. it will change the flex characteristics of the t plate.dont be affraid to use the smaller spurs.i run an 88 spur all the time unless i run mod.i use a 100 tooth spur in mod to allow for a larger pinion for better gear mesh.in stock and 19 turn i use the 88 because it allows me to run a smaller pinion for less rotating mass and also to keep the motor away from the T plate.