What you say is on the
RCTEK Web site
Yes I know.. I've said it before.... some possible things to avoid this problem are :
1. have an adjustable upper arm link (no lucky so far, maybe I'll try with some Tobee parts)
2. move the upper arm mounting holes on chassis a bit inward.
What I did is number 2 (with my previous M03 chassis for outlaw) :
See the U-shape Suspension shaft. it's from DF-02 U-shaft.... I use it 'cause the bumper comes from TL-01B (buggy style) ...
And make some modification for the front part with this :
Just some info ....the look form the bottom :
The center lower hole on battery part is totally a big mistake, make the chassis flex too much ... For this outlaw class I need the chassis as flex as it can but unfortunately it's too flex...
BTW . thanks for the info about Yaris body.... I don't have it yet ...
SUP:
But for my new M03 chassis (grey chassis) I did only a little mod. 'cause it's lighter than black chassis. The black chassis is stiffer and heavy than the grey one (IMO)
Have a look :
Cut the battery holes to support the side-by-side pack .... I never use stickpack on outlaw chassis
See the grey hubs (fron C-hub and rear hub) .. it's lighter too....
