Originally Posted by ROBORAT
RobS: agree!!
todd: maybe you can post your set up for this race..... that way us asphalt racers we have a good starting point when we finally get out hand on our own type-Rs!
ive found your set ups for both the xxxs and the jrxs to be spot on for my needs in the past! ..... cant wait!!! i want one already!
Front Suspension
Toe In/Out-0
Camber -1.25
Ride Ht-4.5mm
Antidive/Kick-0
Camber Link-Jr Link/3
Diff Height-High
Pulley-42/42
Spool
Oil-40wt
Piston-56
Spring 17.5
Bladder-Losi Black
Above Bladder-Tamiya Red Foam
Shock Location-#2 on tower
Arms-Long
Sway Bar-.040"
LCD's
Droop 3mm above ride height
No bumpsteer
Low Roll Center
Front Pivot- 0 degree
Caster Blocks-4 degree
Rear Suspension
Toe In- 3 Degrees
Camber -1.25
Ride Height-4.5mm
Camber Link Location-5/B with tall ball stud on hub
Shock Position-#1 on tower and outside on arm
Arm-Long
Rear Pins Flat
Sway Bar .030"
Oil-35
Piston-56
Spring 10.5
Bladder-Losi Black
Above Bladder-Tamiya Red Foam
RCD's
Low Roll Center
Droop-3.5mm over ride height
Diff Location-Low
Body Mazda 6 with wing mounted back
Tires RP30's
Gear 128/22=10.64:1 with 3.5t Orion BL
No screws in top deck