Max, Jason:
I will give the new steering bushings to Tim so he can bring them to you on Sat morning, I wont be there till about 1:30 if I can even make it... He will let you know whats up.. Let me know if you guys get it right...


The new D12V2 appears to need WAY heavy dampening, maybe even go to the three shock set-up!! You will want to run 20 or 22 front springs and make sure your electronics are mounted far back on the chassis... you can also try the 5degree front blocks? IMPORTANT: Make sure when you set your ride height to make sure there is a slight arch between the main chassis and the rear pod or you will not get the rear end to work quite right, this is a little different operation then a typical 1/12th rear end. The middle spring needs to take most of the weight transfer on the chassis, not the side springs.. Also make sure you have some rear droop on the shock and rear pod... K, cool!

l8tr, Digs