R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 10-10-2006 | 11:40 AM
  #21147  
rayhuang's Avatar
rayhuang
Tech Champion
iTrader: (5)
 
Joined: Dec 2001
Posts: 6,511
From: Cleveland Heights, Ohio
Default

Originally Posted by Motor City Hami
It's pretty necessary when I club race against Chuck Lonergan, Chris Mockerman, Walter Henderson, Chris Mazzola, Josh Cyrul, Rich Chang, etc. Throw in an occasional Eli, Andy Who and Ron Ferguson and that's a fast crowd. I like to run my front tires between 1.8" and 1.7" with 4.0mm front ride height.

YOu can go as low as 1.65" If I recall on the old school arms and a Rev.3/4 and achieve 3mm on nose. This was dependant on how many shims you had built up under the arm as well. 1.7 to 1.8" front tires does not require this mod to be done.

Ray
rayhuang is offline