3racing chassis looks like a kanack but it bends easy Kfacktory rear shaft is great kawahara rear sway and the 4mm kanack chassis is stiffer than the mugen and you can use a 1 piece motor mount i use the kawahara one, and a must aswell is the alloy wheel hexs and front cvds just use mugen cvds all others break, another thing that works well is the bat tray from yes 3racing its stiff and you can mount it tight with the us of 2mm washers and i use the 3racing upper deck brace and rear pod brace,now you dont need alot of hopups but to make the car work that little bit better and stay together longer in a long race they help ti balls help only in weght so if you dont have them dont bother or if you have the $ or wait for the prospec car if you wait for the prospc car you wont need alot of stuff just the upper deck brace and the rear pod brace and the rear blade sway and the ti screws this just helps with weght for the front i run it stock nothing hoped up there but if you wont to run a spool get the kawahara it works and its light.
Last edited by wallyedmonds; 10-09-2006 at 06:50 PM.