R/C Tech Forums - View Single Post - Serpent 720
Thread: Serpent 720
View Single Post
Old 10-05-2006, 06:13 AM
  #1474  
asil
Registered User
 
asil's Avatar
 
Join Date: Sep 2005
Location: Istanbul, TURKEY
Posts: 281
Default

Originally Posted by eduardo_garcia
My 720 came with the following configuration:
front dff: 35t
center shaft middle: 19t
side puley (side belts): both with 22t
main axe center pulley: 24t
rear diff: 47t

Since both side pulleys are equal, we can jsut compare the relation between the front and the rear belts. Therefore, the front relation is 19/35 = 0.542 (each rotation on the main axe is 0.542 rotation on the front wheel) The rear relation is 24/47 = 0.510. Therefore, the difference is 6% (the front wheels are 6% faster than the rear) Ins't it correct?
If the car should came with a standard 21t, this is the thrird main fault on my kit. it's very sad, serpent always delivered top quality products.
According to manual, front side pulley is 22T and rear side pulley is 21T...
asil is offline