Receiver pack for 19t
Hi all
I am in desperate need of a solution to a huge glitch under acceleration in my 12th scale car.
I am running a GT7 with the cap and a Novak XXL and a Futaba Mini servo.
Under hard acceleration (0 throttle to full), the steerin is lost. I was thinking of going with either a 1/2AAA 300mA or 1/3AAA 150mA packs. The question becomes do I have enough time to recharge between heats if we go every 30 mins or so?
Second question, if I install this rx pack and remove the esc Positive lead going to the rx, will the rx pack at 300mA or 150mA have enough energy to drive the servo for an 8 min run?
It would sure be nice to have the ESC Positive lead be able to keep the pack up to voltage!
Thanks