Originally Posted by jnrtin
Im having trouble setting up the rear sway bar on the MRE. Im trying to get equal freeplay from left to right but the left arm wont lift at all when manually lifting the right arm.... There seems to be too much slop in the plastic mount on the bulkhead... Has any one else found this and found a way to sort it? Would appreciate some help. The only other thing in the build that i found was that when I set the steering link as per instuctions the servo horn is off to the right slightly, Im using a s5990 servo. Should i alter the length of the arm to get the horn perfectly upright or leave it? Cheers
One thing I've done is too drill a hole in the mounts, and put a grub screw in them. Just tighten the screws up pinch tight to restrict movement.
On the steering front, make sure the horn is zero'd. So yes, lengthen the link.
HiH
Ed