Originally Posted by andrewdoherty
Oh, I almost forgot why I got on here in the first place . . .
has anyopne else run into problems with the rear wheels (jaco dbl pnk) rubbing the rear shock mounts when using the outer most position on the new arms? I am using the original rear hubs in the inner hole. Its not bad but enough to slow things down. I bet the parmas are off-set a little more to clear the shock end but I don't have a pair to mount up and check.
Andrew,
I cut down the inside of the rear foam tire (and wheels) on my tire truer to give the necessary clearance to the shock end. Usually a flat file will handle it nicely.
For more steering, consider taking a bit off the inside of the front tires too.
If you are trying to get under the 190mm width for a regional/national/major race, you might have to file some foam off the outside wall.
Bill