Well actually I told you back on page two of the thread which is still pretty short. Suppliers for axles are listed in the first post. IRS axles are nice. You need 1/10 pan, narrow, non offset pod, axle. You can repair your current axle in the meantime.
Originally Posted by John Stranahan
Mechanical problems
The little 8 x 32 stud pulled out of the rear axle. It looks like it was glued in and the glue failed or maybe it just stripped the fiberglass which really does not hold threads well. I drilled it 1/4 inch deeper rethreaded it, put in a longer screw with superglue then accelerator, cut off the head with the dremmel and saved the session.
.