Outdoor bitumen foam setup
Hi all,
Here's a good set-up for a fast, flowing outdoor bitumen circuit. Fairly long straight and a couple of fast changes of direction.
This setup placed me second out of a strong field of 60+ cars on the weekend.
Front
40wt 2 hole piston
Yellow spring
Outer hole on arm and shock tower
Stock camber link position
5mm ride height
1mm droop
2 degree neg camber
1 degree toe out
Yellow sway bar
Rear
40 wt 2 hole piston
Yellow spring
Outer hole on arm and middle hole on tower
Upper camber link hole on hub and upper innermost hole on shock tower
5.5mm ride height
3mm droop
2 degree neg camber
2 degree toe in (standard)
Yellow sway bar
Other
Stratus shell
Full time 4WD - no one-ways
Orion Core stock
Rollout of 30.5
37 shore front and 35 shore rear
60mm rear tire, 58mm front tire
Orion 3000HV cells
Ambient temp 40 degress celcius +!!!!!!!!
Car proved very easy to drive and extremely manouverable through traffic. Worst part of the track for the car was the high speed sweeper (no one-ways) but the car was awesome on the fast direction changes.
Lack of testing time meant I could not try one-ways, but I would have liked to.
Keep the set-ups coming and bring on the TRF TA04!
Scotty