View Single Post
Old 08-30-2006, 11:43 PM   #1
Drift_Buggy
Tech Elite
 
Drift_Buggy's Avatar
 
Join Date: Dec 2004
Location: Australia
Posts: 2,652
Trader Rating: 21 (100%+)
Default Kyosho MP7.5 K3 Parts

I just bought off ebay a Kyosho Inferno MP7.5 K3 which didn't include a air cleaner or clutch etc.. Im looking at getting the OS .21VZ for it and was wondering if any clutch would work? I notice most clutches say that they are for a particular kit but can they still be used on other kits?
Im looking at getting the Ofna Clutch kit
http://www2.towerhobbies.com/cgi-bin...2&I=LXBZT6&P=K
with the Ofna 13t clutch bell and bearing
http://www2.towerhobbies.com/cgi-bin...2&I=LXBL91&P=K
The only other thing I can thing of is the collet
http://www2.towerhobbies.com/cgi-bin...?&I=LXM719&P=7
Will all those work on the Kyosho with the O.S Engine? And is there anything else I need for the clutch side of things?

Also, with the air cleaner. Can I just use one off a Jammin? They seem to be the same design as the Kyosho and I can get one brand new for half the price of the Kyosho Filter
http://www2.towerhobbies.com/cgi-bin...2&I=LXLMW7&P=K

Many Thanks
Drift_Buggy is offline   Reply With Quote