Originally Posted by sohlman
That's funny, I replaced everything you just suggested except the battery strap...can't find the right thumb screw.
Lunsford ti turnbuckles
RPM ball cups
Tamiya shocks - but I did get the RDX ones to work - new bladders
Eliminated the c-clips by notching the hinge pins with a Dremel and used the set screws - had to ream out the arms a little to free them up
I was referring to the circlip in the diff (that seems to always get messed up). I dont use the clips on the hinge pins. I dremeled and use the set screw. I use the ti turnbuckles as well with the Schumacher Ball Grippa cups. HPI shocks...
Not sure why the torx screws are a problem. Only requires one extra tool.