R/C Tech Forums - View Single Post - Schumacher Corner
View Single Post
Old 08-21-2006, 03:19 PM
  #15765  
Jon Kerr
Tech Champion
iTrader: (17)
 
Jon Kerr's Avatar
 
Join Date: Jul 2002
Location: San Diego
Posts: 9,659
Trader Rating: 17 (100%+)
Default

Unfortunately there's no way to alter the rear toe with the blocks the car comes with. You can get the old plastic pivot blocks from the original Mi2. Those will give you either 1.5º or 3º depending on which way you install them. The hinge pin hole is also .5mm higher on them so if you do get them, you'll need to shim them .5mm lower than the alloy blocks to keep the same roll center.
Jon Kerr is offline