Hello everyone
Ok here goes this is the set-up I am currently running on Ozite carpet. the concrete surface is a little rough so I have my spring combination a little soft. When I go to a track that is smooth I usually go up one spring at both ends.
This set-up is for stock racing, not sure how it will work in modified. it is very agile through the corners, but if you try to throw it around to much the rear end will tend to slide out.
Front:
Shock Lenght 66mm
#3 position on tower #1 on arm
80 wt oil 2holes
10 degree's castor
Yellow Spring
#2 position on suspension mount #2 on Hub
#2 steering position on steering knuckle
1/2 degree toe
5mm ride height
2mm droop
Rear
Shock Length 66mm
#2 position on tower #1 on arm
80wt oil 2 holes
Red spring
2.5 degree toe
#2 position Suspension Mount #2 on hub
5mm Ride height
2mm Droop
I have the layshaft one way and the one way front diff installed. Tires are sorex 28's with HPI inserts.
Our track tight with the racing surface being 78'x36'.
Hope this helps
PaulP