Originally Posted by danjoy25
Guys,
I have the IRS spacers coming and a few other bits. I just realised being a newbie that I still need shims to adjust the front end. Would using anytype of washer/spacers be sufficient to do the job.
Can anyone also recommend atleast 3 pinion gears to have using a 72 tooth spur (48 pitch) using a KR 10 double motor?
CRC has nice shims for under the arms from what i was told.the teflon castor shims that come with the kit is all you will need unless you want to upgrade them also to the CRC ones.the kingpin shims usually come with the car but if you need em AE sells them.as far as gearing,we will need your tire size to give you a good ballpark gearing.