EA, the cell temp readings on my unit are within 1C degree of my personal temp gauge (using a small blue "flashpoint" temp gauge).
I'll try a lower peak detect (2mV) and will post new peak cell temps ...
Erik Jonk, ... I updated to 1.05b but I'm still getting issues when using Farenheit over Celsius ... I can set peak temp at 130F ... but when I power back the charger it rolls back to 2F peak temp setting!?! Any way around this? Also, is it normal for the big black heatsink to get near 63C while charging ... (4-cell 6A 4mV min45C max 55C)
Thanks!
Steve.
TQ Cells
Last edited by TQ Cells; 07-25-2006 at 10:22 AM.