Originally Posted by TQ Cells
What peak cell temps are you getting at 2.0mV? ... I'm getting the cells peaking at 50-53C using 4.0mV which looks fine to me!
Are you saying your unit is still charging the cells even after is says "FULL" ... mine stop charging each cells as they get the "FULL" status ...
Steve Salvas
TQ Cells
Hey Steve,
The packs I charged here at home were getting to around 135-140 (this is checking with a Temp gun on top of the cells...maybe the gun's not accurate as the charger cuttoff is set to 120 degrees) at 6amp charge with 2.0mV.
After it says full it will keep going for about 10-15 minutes but its not charging the cells. The voltage will start to fall back on each cell so I know its not charging. But in the Milliamp screen it will show the cells mah for each cell, and they are not climbing when it does this, but the total pack mah will still be climbing the whole time.
EA