R/C Tech Forums - View Single Post - pro3
Thread: pro3
View Single Post
Old 01-11-2003, 05:30 AM
  #1414  
sosidge
Tech Elite
 
sosidge's Avatar
 
Join Date: Dec 2001
Location: Bristol, UK
Posts: 4,438
Default Carpet setup

Try this as a starting point...

Everything standard except

HB top deck fitted

Front
Jaco Blue foams
25mm Yellow springs (~390g/mm)
80wt shock oil
3deg caster block w/1mm spacer
Camber set to even wear (1-2deg)

Rear:
Jaco Blue foams
27mm Grey springs (~340g/mm)
60wt oil
HB 1deg toe in blocks (probably not necessary, but I couldn't be bothered to take them off)
Camber set to even wear

May be worth trying a higher rear roll centre (camber link on upper hub carrier hole) if track is tight.
sosidge is offline