R/C Tech Forums - View Single Post - HPI RS4-3 Thread
View Single Post
Old 07-05-2006, 10:30 PM
  #261  
dopex
Tech Rookie
 
Join Date: Jul 2006
Posts: 13
Default

Originally Posted by Osiris 75
You need to turn the idle screw to the left to lower the idle, and also look at your radio to see if you have the throttle turned all the way up. And when you get it started, give it some throttle to get all of the fuel out of the engine, then adjust the idle again as low as you can, low enough to keep the engine running!!
Thanks for the help all. I looked at the engine throttle on the radio and I put it back all the way. I'll try making the idle lower tomorrow morning
dopex is offline