Originally Posted by HK Racing Joe
I've been racing for about 4 years now and its less and less fun. I'm gonna probably convert my car to drift. I run a TC3 with a Warpspeed demon chassis. What things should I get to go drifting (Tires, motors, etc.) Also could anyone give me a good setup for the TC3?
oh yea another tc3 drifter
...(not down grading the other chassis its just more friends i can talk to about the tc3 chassis)
i belive paz runs the same warpspeed chassis or that might be for his carpet and he as another tub chassis for drifting...
get abs tires, gat any stock motor but if you can get a p2k2 or a monster... usually stock motors with higher tourqe is what you want for drifting.
as for a basic set-up to get you going, run both open diffs with the rear around .75 of a turn tighter than the front, the spring have the rear a set stiffer than the front but you want to stay on the softest set you can get for the drifting aplication..i would use green up front and silver in the back (green is the softer one right?)
and that should get you going
